Panels
Flanges, returns, and formed edges for machine or control panels.
Forming
Sheet Metal Bending
Bending support for custom sheet-metal panels, brackets, covers, and hardware components.
Overview
Review the formed shape as an assembly
Bending changes more than the visible angle. Material, thickness, bend direction, inside radius, nearby holes, and downstream finishing can all affect the finished part.
Hueng Yu reviews bending requirements with the overall processing route. Equipment model, maximum dimensions, and fixed tolerances are not published because feasibility is confirmed from each drawing.
Applications
Common bending requirements
Brackets
Custom support parts with hole patterns and assembly faces.
Covers
Formed sheet parts for equipment protection and appearance.
Hardware parts
Small-batch components combining cutting, punching, bending, and finishing.
Project Review
Geometry and sequence to confirm
Early review helps avoid interference between holes, bends, surfaces, and fasteners.
- Material, thickness, grain or surface direction, and visible face
- Inside radius, bend direction, angle, and critical formed dimensions
- Distance from holes or cutouts to bend lines
- Sequence with laser cutting, punching, riveting, coating, and printing
Quotation
Information to provide
- A 2D or 3D drawing, dimensioned sketch, or representative sample
- Material and current surface condition
- Quantity, application, appearance side, and assembly requirements
- Required delivery timing and any downstream process
Discuss your project
Send drawings, photos, material information, quantity, and application details for a practical feasibility review.
Contact Hueng YuRelated Services